Aignep 1000 series — brass fittings with a nut. The range covers straight, angled, T, Y and cross connectors, couplings, reducers and plugs.
Aignep 1000 series — brass fittings with a nut.
The Aignep 1000 series are brass fittings with a nut from the Push-On range. The hose is pushed onto the connector body and the nut presses it to make the seal.
The series covers all the usual shapes: straight and angled connectors for joining tube to a thread, T and Y connectors for branching, cross connectors for distribution to three sides, couplings for extending tube, reducers for a transition between diameters and plugs for closing off unused ports.
The connector is chosen according to the outside diameter of the tube and the thread size on the machine. The wrong combination is the most common cause of leaks, and every leak works 24 hours a day and is paid for through the compressor’s running.
Tube–thread, straight through
Details
Tube–thread, 90° turn
Details
Distribution to two sides
Details
Angled branching
Details
Joining two tubes of the same diameter
Details
Transition between two tube diameters
Details
Distribution to three sides
Details
Closing off an unused port
DetailsNo results for this search.
Send us the tube diameter, thread size and quantities — we will check availability in stock in Šimanovci.
