Omega Air · F-DRY · regeneration with compressed air
The F-DRY series works with regeneration by compressed air, in a version intended for higher flow rates than the basic B-DRY series.
Operation alternates: while one column dries, the other regenerates. The regeneration method directly determines how much air or energy the dryer consumes, which makes it the most important criterion when selecting a series.
A pre-filter, which protects the adsorbent from oil, and an after-filter, which retains dust from the adsorbent bed, are both mandatory. Without them the adsorbent is quickly consumed and dust carries over into the network.
Sizing follows the air flow rate and the required dew point. Demanding a lower dew point increases regeneration consumption, so it should be set to the real requirement of the process rather than with a safety margin.
| Manufacturer | Omega Air (Slovenia) |
| Series | F-DRY |
| Type | Compressed air adsorption dryer |
| Dew point | −20 °C / −40 °C / −70 °C |
| Regeneration | Regeneration with compressed air |
| Working pressure | Standard industrial |
| Operation | Alternating, two columns |
| Filtration | Pre-filter and after-filter mandatory |
Omega Air factory warranty with regular maintenance in line with the manufacturer’s instructions.
Emergency call-outs across the region — Serbia, Montenegro, Bosnia and Herzegovina. Certified technicians.
Genuine spare parts and consumables permanently available from our warehouse in Šimanovci.
Training at commissioning. Technical support by phone and on site.
